<![CDATA[EnergiPersonnel: jobboards]]>

<![CDATA[EnergiPersonnel: jobboards]]> https://JOBS.ENERGIPERSONNEL.COM/ en-us <![CDATA[Assistant Glazier / Construction Helper]]> Now Hiring: Assistant Glazier / Construction Helper

Location: Midland, TX

Job Summary

--We are seeking a hardworking and dependable Assistant Glazier / Construction Helper to support an experienced Journeyman in the installation of commercial and residential glass systems.

--This position is ideal for someone who enjoys hands-on work, takes pride in quality craftsmanship, and is willing to learn the glazing trade.

--The Assistant Glazier will help with glass installation projects, insulation work, material handling, construction support tasks, job site preparation, and maintaining a safe work environment. Candidates must be physically capable of lifting and handling heavy materials daily and working in various outdoor and indoor conditions.

Key Responsibilities

Assist Journeyman with the installation of glass, storefront systems, windows, doors, mirrors, and related glazing products.
Help move, transport, stage, and position glass panels and construction materials safely.
Hold and stabilize glass during installation procedures.
Assist with insulation work and general construction labor activities.
Load and unload materials, tools, and equipment at job sites.
Measure, prepare, and clean work areas before and after installations.
Maintain a clean, organized, and safe job site.
Follow all company safety procedures and industry best practices.
Operate hand and power tools under supervision.
Assist with sealing, caulking, finishing, and other installation-related tasks.
Travel to job sites as needed throughout the region.
Perform additional duties as assigned by the Journeyman or Supervisor.

Required Qualifications

Valid Driver's License with a clean driving record.
Ability to frequently lift, carry, and maneuver up to 80 pounds.
Must be in good physical condition and capable of performing demanding manual labor daily.
Ability to stand, bend, kneel, climb, and work for extended periods.
Strong work ethic with a willingness to learn the glazing and construction trade.
Dependable attendance and punctuality.
Ability to work safely in both indoor and outdoor environments.
Basic construction experience is preferred but not required.
Experience working with glass, insulation, framing, or general construction is a plus.
Ability to follow directions and work effectively as part of a team.

Preferred Qualifications

Previous experience in glazing, construction, insulation, or general labor.
Familiarity with basic hand and power tools.
Forklift or equipment operation experience is a plus.
Physical Requirements
Frequently lift and carry up to 80 lbs.
Regularly assist with handling large glass panels and construction materials.
Ability to climb ladders and work at varying heights.
Ability to perform physically demanding tasks throughout a full work shift.
Comfortable working in varying weather conditions.

What We're Looking For

We are looking for a motivated individual who is eager to learn a skilled trade, takes safety seriously, works well with others, and is willing to put in the effort necessary to grow within the glazing and construction industry.

This is an excellent opportunity to gain hands-on experience while working alongside an experienced Journeyman Installer.

]]> Fri, 11 Sep 2026 00:00:00 CDT 0 <![CDATA[Front End Loader / General Labor]]> Client in Mentone, TX is seeking:

Front End Loader Operator

Front end loader operators feed sand into hoppers at the wet sand production area of the sand plant.

Perform General Labor work

Must have MSHA Part 46 training

Must have a Driverâ s License

Work 45-60 days with no day off at 12 hour days

]]> Fri, 11 Sep 2026 00:00:00 CDT 0 <![CDATA[Field Service Technician]]> Now Hiring: Field Service Technician

Location: New Mexico

Excellent Opportunity with a Growing Oilfield Water Treatment & Chemical Services Company

We are seeking a motivated, mechanically inclined, and driven Field Service Technician to join our growing team supporting water treatment, chemical treatment, disposal wells, production facilities, pipelines, and water reuse operations throughout New Mexico and West Texas.

This position is ideal for individuals who enjoy working in the field, solving mechanical problems, utilizing data and analytics to improve system performance, and building strong customer relationships.

We are looking for candidates with a strong work ethic, a positive attitude, and a genuine eagerness to learn and grow within the oilfield service industry.

Primary Responsibilities

Field Operations & Equipment Maintenance

Perform troubleshooting, repairs, and preventative maintenance on chemical injection pumps and related equipment.
Inspect and maintain equipment at production facilities, saltwater disposal wells, pipelines, tank batteries, and water reuse facilities.
Monitor equipment performance and identify operational issues before they become failures.
Conduct routine inspections of company vehicles, tools, pumps, tanks, and field equipment to ensure safe and efficient operation.
Ensure all field equipment is properly labeled, maintained, and operated according to customer and company requirements.

Water Sampling & Chemical Treatment

Collect water samples and perform field testing to evaluate water quality and treatment effectiveness.
Conduct tank gauging, pump monitoring, and chemical inventory management.
Monitor chemical treatment programs and identify opportunities for optimization.
Assist with chemical dosage adjustments and treatment recommendations based on field observations and analytical results.
Communicate treatment concerns, operational issues, and quality control findings to management and customers.

Analytics & Performance Monitoring

Analyze field data to monitor system pressures, pipeline constraints, corrosion risks, bacteria activity, and overall system integrity.
Track chemical injection rates, treatment performance, and inventory levels to ensure accurate chemical application.
Conduct baseline system surveys and water analysis to support treatment recommendations and operational improvements.
Monitor and document operational trends, asset performance, and treatment effectiveness using company software and reporting tools.
Assist with pilot projects and performance evaluations by collecting and analyzing operational data to identify efficiencies and cost-saving opportunities.
Prepare accurate field reports and maintain detailed records through tablet-based software systems.

Customer Relations & Communication

Serve as the face of the company in the field by providing professional customer service and support.
Maintain regular communication with Field Coordinators, Account Managers, and customers regarding operational performance, safety concerns, and maintenance requirements.
Build positive customer relationships through dependable service, professionalism, and timely problem resolution.

Safety & Compliance

Adhere to all company safety policies, procedures, and industry regulations.
Wear required PPE and actively promote a safety-first culture.
Identify and report safety hazards, operational risks, and environmental concerns.
Maintain clean, organized, and safe work environments at all locations.

Required Qualifications

Experience with pump repairs, troubleshooting equipment, and preventative maintenance.
Strong mechanical aptitude with the ability to diagnose and resolve field equipment issues.
Valid driver's license with a clean Motor Vehicle Record (MVR) required.
Ability to safely operate company vehicles and travel extensively throughout assigned territories.
Strong computer and technology skills with the ability to utilize tablets, field software, and digital reporting systems.
Ability to work independently with minimal supervision while managing multiple priorities.

Strong communication and customer service skills.

Must possess a strong eagerness to learn, accept coaching, and continuously develop technical knowledge and field skills.
Must be teachable, open to feedback, and willing to learn company-specific chemical treatment programs, water testing procedures, and analytical processes.
Ability to lift and carry 50+ pounds regularly.
Ability to work outdoors in varied weather and field conditions.
Ability to pass a pre-employment drug screen and physical examination.
Must be able to work a 14 days on / 7 days off rotational schedule.
Must be able to work up to 15-hour shifts, including both day and night rotations as required by business needs.

Preferred Qualifications

Experience in oilfield production, water transfer, saltwater disposal, pipeline operations, chemical services, or water treatment.
Knowledge of chemical injection systems and treatment programs.
Experience with water sampling, testing, and analysis.
Understanding corrosion prevention, bacteria treatment, scale control, and water chemistry.
Experience reviewing operational data, treatment performance metrics, and system analytics.
Familiarity with produced water recycling, reuse systems, and disposal operations.

If you are mechanically inclined, eager to learn, customer-focused, and looking for a rewarding career in the oilfield water treatment industry, we encourage you to apply today.

]]> Tue, 08 Sep 2026 00:00:00 CDT 0 <![CDATA[Heavy Equipment Technician]]> A great client in Odessa is seeking an experienced Heavy technician.

The Company is looking to add an experienced technician to our Service Department. We are seeking skilled professionals with verifiable training and hands-on experience diagnosing, repairing, and maintaining heavy equipment and crane systems.

We offer competitive pay based on experience and training, along with a comprehensive benefits package that includes medical, dental, vision, 401(k), company-provided uniforms, and laundry service.

We are actively hiring and looking to fill this position quickly. Qualified candidates are encouraged to apply today.

Benefits

Competitive pay based on experience
Medical, dental, and vision insurance
401(k) retirement plan
Company-provided uniforms
Uniform laundry service
Stable, full-time employment
Opportunities for continued training and development

Key Responsibilities

Diagnose, maintain, and repair mechanical, electrical, and hydraulic systems on company-owned and customer-owned equipment.
Perform inspections, maintenance, troubleshooting, and repairs on:
Truck-Mounted Cranes
Rough Terrain Cranes
All Terrain Cranes
Crawler Cranes
Lattice Boom Cranes
Boom Trucks
Excavators
Dozers
Rollers
Other construction and heavy dirt equipment
Interpret schematics, wiring diagrams, and technical manuals to complete repairs.
Communicate effectively with customers and office staff regarding equipment issues and repair solutions.
Complete service documentation, work orders, and repair reports accurately and on time.
Follow all company safety policies and environmental regulations.
Perform additional duties as assigned.

Qualifications

Minimum 1 year of experience maintaining, troubleshooting, and repairing heavy equipment.
Strong knowledge of mechanical, electrical, and hydraulic systems.
Ability to read and interpret equipment schematics and diagrams.
Valid driver's license required.
Factory training certifications are a plus.
Experience with Manitowoc, Grove, and Kobelco cranes is highly preferred.
Basic computer skills required.
Experience with diagnostic software and electronic troubleshooting is a plus.
Ability to work independently with minimal supervision.
Must own or be able to obtain tools necessary for the position.
Strong customer service and communication skills.

Physical Requirements

Ability to lift, carry, push, and pull heavy components and tools.
Frequent climbing, bending, twisting, squatting, kneeling, and standing for extended periods.
Ability to work safely in shop and field environments.

Preferred Experience

Heavy Equipment Repair
Crane Repair and Maintenance
Hydraulic Systems
Electrical Troubleshooting
Diesel Equipment Repair
Construction Equipment Maintenance
Diagnostic Software
Preventive Maintenance
Field Service
Equipment Inspection

We are looking for dependable, experienced technicians who take pride in quality workmanship and safe operating practices. If you have the skills and experience to keep heavy equipment operating at peak performance, we'd like to hear from you.

]]> Mon, 31 Aug 2026 00:00:00 CDT 0 <![CDATA[Code Welder]]> Now Hiring: Code Vessel Welder

Location: Andrews, TX

We are seeking an experienced Code Vessel Welder to join our welding team in Andrews, TX. This position is responsible for performing high-quality welding operations while maintaining strict safety, quality, and production standards.

The ideal candidate will have experience with pipe and structural welding, be able to interpret drawings and specifications, and consistently produce welds that meet inspection requirements.

Key Responsibilities

Perform welding in accordance with approved WPS and applicable welding codes.
Weld using SMAW, GTAW (TIG), GMAW (MIG), and FCAW processes.
Read and interpret blueprints, drawings, and weld symbols.
Prepare materials through cutting, grinding, fitting, and fabrication.
Maintain weld quality to meet visual, radiographic, and ultrasonic inspection standards.
Safely operate welding and related shop equipment.
Complete required weld documentation and quality records.
Follow all company, client, and OSHA safety policies.
Work with supervisors and inspectors to resolve weld repairs and quality concerns.
Perform additional duties as assigned.

Qualifications

Previous experience with pipe welding on carbon steel, stainless steel, and alloy materials.
Strong knowledge of structural and pipe welding practices.
Ability to pass an ASME 6G Pipe Welding Test.
Ability to read blueprints, drawings, and welding specifications.
Basic math skills including fractions and decimals.
Strong attention to detail and commitment to quality workmanship.
Reliable transportation and valid driver's license.
Ability to read, write, and communicate in English.

Schedule

Monday through Friday, generally 6:00 AM to 5:00 PM
Overtime and weekend work as required to meet project demands.

Physical & Working Conditions

Work primarily in a shop environment with exposure to heat, noise, welding fumes, and heavy equipment.
Ability to stand, bend, walk, and lift up to 75 lbs.
Must be able to work long hours when needed.
Ability to work outdoors in varying weather conditions.
Required use of PPE including safety glasses, steel-toed boots, hearing protection, welding shields, and FRC clothing when applicable.

Requirements

Successfully pass pre-employment drug screening, background check, MVR review, and any required client screening processes.
Strong commitment to workplace safety and quality standards.
Availability to work extended hours and respond to operational needs with short notice.

Join a team that values safety, craftsmanship, and quality while offering the opportunity to work on challenging welding projects in a professional environment.

]]> Thu, 27 Aug 2026 00:00:00 CDT 0 <![CDATA[Sales & Warehouse]]> Well Established Client in Odessa, Tx is seeking:

Outside / Inside Sales Representative Oil & Gas and Warehouse Management

Build relationships with drilling, production, and industrial customers while providing ongoing support and account management.
Focuses on customer retention, sales growth.
Handles customer inquiries, quotes, sales orders, and product recommendations from the office and outside visits.
Combines customer visits and support with sales responsibilities.
Ensure customers receive value from products and services while identifying sales opportunities.
Be able to work in the warehouse for any will call customers.
Must be self-sufficient and reliable.

Any specific experience they need to have or that is a big plus!
- Good communication skills
- QuickBooks Experience
- CRM Experience
- Must be able to drive a vehicle
- Forklift certification a plus

Any benefits offered
- Company Truck and Laptop
- Company Cell Phone
- $6,000 annual contribution towards Healthcare Insurance
- 401K
- 2 weeks vacation

]]> Thu, 27 Aug 2026 00:00:00 CDT 0 <![CDATA[CNC Machinist]]> Now Hiring: CNC Machinist (Rod Manufacturing)

Location: Odessa, Texas

Job description but not limited to:

Set up, operated, and monitored CNC lathes and machining equipment to manufacture precision rods and components according to engineering specifications and production requirements.
Interpreted blueprints, work orders, and technical drawings to ensure accurate dimensions, tolerances, and product quality.
Performed machine setup, tooling changes, offsets, and adjustments to optimize production efficiency and maintain quality standards.
Conducted in-process and final inspections using precision measuring instruments, including calipers, micrometers, gauges, and other quality control tools.
Maintained tight tolerances while producing high-volume and custom rod products for industrial applications.
Troubleshoot machine issues and collaborated with supervisors and maintenance personnel to minimize downtime and improve productivity.
Monitored material usage and machine performance to reduce waste and maximize operational efficiency.
Performed routine preventive maintenance, cleaning, and upkeep on CNC machinery and tooling.
Maintained a safe work environment by following company policies, manufacturing procedures, and OSHA safety regulations.
Consistently met production goals while ensuring quality, precision, and on-time delivery of finished products.

Key Skills Looking for

MUST BE: Physically fit to be able to lift 75-100lbs on a regular basis
CNC Machining
CNC Lathe Operation
Blueprint Reading
Precision Measurement
Micrometers & Calipers
Quality Control
Machine Setup
Tool Changes
Manufacturing Operations
Preventive Maintenance
Problem Solving
Safety Compliance
Production Efficiency
Mechanical Aptitude
Attention to Detail

]]> Thu, 27 Aug 2026 00:00:00 CDT 0 <![CDATA[Pipe Yard Maintenance Technician]]> Now Hiring: Pipe Yard Maintenance Technician

Location: Midland, Texas

Position Summary

The Inspection Equipment Maintenance Technician is responsible for the maintenance, troubleshooting, repair, and preventive maintenance of inspection equipment and support machinery used in pipe yard operations.

This position ensures all inspection systems, hydraulic power units, hydro testers, cleaning machines, bucking units, forklifts, utility vehicles, and related equipment remain safe, reliable, and operational.

The successful candidate will possess strong mechanical and troubleshooting skills and have experience performing routine maintenance, repairs, and equipment inspections in an industrial environment.

Essential Duties and Responsibilities

Perform preventive maintenance on all inspection and production equipment.
Troubleshoot and repair mechanical, hydraulic, pneumatic, and electrical systems.
Maintain and repair EMI inspection equipment and associated support systems.
Service and maintain pipe cleaning machines, hydrotest units, bucking machines, and material handling equipment.
Diagnose and repair hydraulic power units (HPUs), pumps, motors, valves, cylinders, hoses, and fittings.
Perform routine oil changes, fluid checks, filter replacements, and lubrication programs.
Inspect equipment for wear, damage, leaks, and safety concerns.
Maintain forklifts, Kubota utility vehicles, generators, compressors, and other support equipment.
Replace bearings, chains, sprockets, belts, rollers, seals, and other mechanical components.
Read hydraulic schematics, equipment manuals, and maintenance procedures.
Respond to equipment breakdowns and minimize operational downtime.
Maintain maintenance logs, service records, and equipment inspection reports.
Coordinate with operations personnel to schedule repairs and maintenance activities.
Assist with equipment installations, upgrades, and modifications.
Maintain inventory of maintenance parts, fluids, and consumables.
Ensure compliance with company safety procedures and lockout/tagout requirements.

Qualifications

Required

High school diploma or GED.
Minimum 3 years of industrial maintenance or heavy equipment maintenance experience.
Experience troubleshooting hydraulic systems and hydraulic power units.
Experience performing preventive maintenance programs.
Knowledge of lubrication systems, oil changes, and fluid management.
Ability to safely use hand tools, power tools, and diagnostic equipment.
Ability to read and interpret technical manuals and schematics.

Preferred

Experience in pipe yards, oilfield service facilities, machine shops, or industrial maintenance.
Welding and fabrication experience.
Forklift maintenance experience.
Knowledge of EMI inspection equipment and hydrotesting systems.
Electrical troubleshooting experience involving motors, sensors, and control systems.
OSHA safety training or industrial maintenance certifications.

Knowledge, Skills, and Abilities

Strong mechanical aptitude.
Hydraulic troubleshooting and repair.
Preventive maintenance planning and execution.
Equipment diagnostics and root-cause analysis.
Welding and fabrication skills preferred.
Time management and organizational skills.
Ability to work independently and prioritize multiple tasks.
Commitment to safety and quality workmanship.

Physical Requirements

Ability to lift up to 75 pounds.
Frequent standing, walking, climbing, kneeling, and bending.
Ability to work in outdoor environments and varying weather conditions.
Ability to safely work around heavy machinery and moving equipment.
Ability to use hand and power tools for extended periods.

Working Conditions

Industrial pipe yard environment.
Exposure to dust, noise, vibration, hydraulic fluids, lubricants, and varying weather conditions.
Occasional overtime, weekend work, and emergency call-outs may be required.

Performance Metrics

Equipment, uptime and reliability.
Preventive maintenance completion rate.
Safety performance and compliance.
Maintenance documentation accuracy.
Reduction of unplanned equipment downtime.

Career Progression Maintenance Technician I → Maintenance Technician II → Senior Maintenance Technician → Lead Maintenance Technician → Maintenance Supervisor → Maintenance Manager

]]> Wed, 26 Aug 2026 00:00:00 CDT 0 <![CDATA[EMI Inspector]]> Now Hiring: EMI Inspector

Location: Midland, Texas

Position Summary

The EMI Technician / Level II Inspector is responsible for performing Electromagnetic Inspection (EMI) and other Non-Destructive Testing (NDT) methods on drill pipe, tubing, casing, line pipe, pipelines, and other Oil Country Tubular Goods (OCTG).

This position evaluates the integrity and condition of tubular products by identifying defects, corrosion, wear, wall loss, cracks, and mechanical damage while ensuring compliance with industry standards, customer specifications, and company quality requirements.

The ideal candidate will possess strong technical knowledge of tubular inspection processes, maintain accurate documentation, operate inspection equipment safely and efficiently, and assist in training and mentoring entry-level technicians.

This role requires a strong commitment to safety, quality, and operational excellence in both shop and field environments.

Essential Duties & Responsibilities

Perform EMI, MPI/MT, UT, VTI, and other applicable NDT inspections on drill pipe, tubing, casing, pipelines, and OCTG products.
Operate, calibrate, maintain, and perform pre-operation checks on inspection equipment.
Interpret inspection data and inspection signals to identify defects, corrosion, wall loss, cracks, fatigue, and mechanical damage.
Accurately classify pipe condition in accordance with company procedures, customer specifications, and industry standards.
Verify pipe identification, measurements, and traceability throughout the inspection process.
Complete inspection reports, evaluations, maintenance logs, and required documentation accurately and timely.
Maintain inspection records and ensure documentation meets quality requirements.
Sort, mark, segregate, and identify materials based on inspection results.
Troubleshoot equipment issues and coordinate maintenance or repairs as needed.
Ensure compliance with all company safety policies, customer requirements, and industry regulations.
Communicate inspection findings and recommendations to customers, supervisors, and management.
Train, mentor, and support Level I Technicians and other inspection personnel.
Maintain a clean, organized, and safe work environment.
Assist with yard operations and additional inspection services as required.
Travel to customer locations and field sites when needed.

Qualifications

Required

High School Diploma or GED.
EMI (Electromagnetic Inspection) Certification.
MPI/MT (Magnetic Particle Inspection) Certification.
VTI (Visual Thread Inspection) Certification.
Minimum 3-5 years of experience performing tubular inspections within the oil and gas industry.
Ability to read, interpret, and follow technical procedures, industry standards, and customer specifications.
Computer proficiency and experience with inspection reporting systems.
Strong commitment to safety and quality.

Preferred

ASNT or related NDT certifications.
Experience inspecting drill pipe, tubing, casing, line pipe, pipelines, and other OCTG products.
Forklift Certification.
Bilingual English/Spanish communication skills.
Knowledge of pipeline integrity assessment programs.

Knowledge, Skills & Abilities

Thorough understanding of electromagnetic inspection principles and NDT techniques.
Strong knowledge of OCTG and tubular inspection processes.
Ability to recognize, evaluate, and accurately document defects and abnormalities.
Strong analytical, troubleshooting, and problem-solving skills.
Excellent attention to detail and accuracy.
Effective verbal and written communication skills.
Ability to work independently with minimal supervision.
Strong organizational and record-keeping skills.
Ability to work effectively in a team environment.

Physical Requirements

Ability to stand, walk, bend, kneel, stoop, and climb for extended periods.
Ability to lift and carry up to 75 pounds.
Ability to work around moving equipment, machinery, and heavy oilfield equipment.
Ability to distinguish visual indicators and monitor inspection displays.
Must be able to wear all required PPE at all times.

Work Environment

Combination of shop, pipe yard, and field environments.
Exposure to varying weather conditions, dust, noise, machinery, and industrial hazards.
Frequent interaction with customers, inspectors, and field personnel.
Overtime, rotating schedules, weekend work, and occasional overnight travel may be required based on business needs.

Performance Expectations

Inspection accuracy and quality assurance.
Compliance with customer specifications and industry standards.
Accurate and timely documentation.
Equipment care and utilization.
Productivity and operational efficiency.
Adherence to all safety procedures and company policies.

This position offers the opportunity to play a key role in ensuring the safety, reliability, and integrity of critical oilfield tubular products through industry-leading inspection and quality processes.

]]> Wed, 26 Aug 2026 00:00:00 CDT 0 <![CDATA[Warehouse Associate]]> Now Hiring: Warehouse Associate

Location: Hobbs, Nm

Position Summary

We are seeking a dependable and motivated Warehouse Associate to support daily warehouse operations. This position is responsible for receiving, stocking, organizing, and shipping electrical supplies and materials while maintaining a safe and efficient work environment. The ideal candidate is detail-oriented, able to work in a fast-paced setting, and committed to providing excellent service to both internal and external customers.

Essential Duties and Responsibilities

Receive incoming shipments and verify materials against packing slips and purchase orders.
Unload, inspect, and properly store inventory in designated warehouse locations.
Stock shelves, racks, and bins with electrical products and materials.
Pull customer orders from pick tickets accurately and efficiently.
Prepare orders for shipment by packaging, labeling, and staging materials.
Measure and cut electrical wire and cable to customer specifications for order fulfillment.
Conduct inventory counts and assist with inventory accuracy initiatives.
Operate forklifts and other warehouse equipment safely and efficiently.
Maintain a clean, organized, and safe warehouse environment.
Assist with loading and unloading delivery vehicles.
Identify and report damaged, missing, or incorrect materials.
Follow all company safety policies and procedures.
Provide support to warehouse, delivery, and counter sales operations as needed.

Qualifications

Ability to read and interpret work orders, pick tickets, and ship documents.
Basic computer skills and inventory management experience are a plus.
Strong attention to detail and organizational skills.
Ability to work independently and as part of a team.

Physical Requirements

Ability to lift, carry, push, and pull up to 50 pounds regularly.
Ability to stand, walk, bend, squat, and reach throughout the workday.
Ability to work in a warehouse environment with varying temperatures.
Ability to safely operate warehouse machinery and equipment.

Key Competencies

Reliability and punctuality
Strong work ethic
Attention to detail
Teamwork and communication skills
Customer service mindset
Commitment to workplace safety

]]> Tue, 25 Aug 2026 00:00:00 CDT 0 <![CDATA[Quality Technician]]> Now Hiring: Quality Technician

Location: Big Springs, Texas

Position Summary

The Quality Technician reports directly to the Quality Manager and is responsible for maintaining the highest quality standards throughout the production process by performing detailed inspections, precise dimensional measurements of large mechanical components, production monitoring, and quality reporting.
The successful candidate demonstrates exceptional attention to detail, accuracy, and mechanical aptitude, understanding that exact measurements, complete documentation, and adherence to safety procedures are critical to product quality, customer satisfaction, operational excellence, and the release of conforming products.

Essential Duties and Responsibilities but not limited to:

Perform incoming, in-process, and final inspections of raw materials, components, and finished products.
Ensure raw materials and finished products meet specifications through meticulous examination and the use of high-accuracy measuring equipment.
Conduct dimensional inspections and verify compliance with tolerances, engineering drawings, blueprints, and technical specifications.
Read and accurately measure using both analog and digital micrometers, including high-accuracy ID and OD micrometers.
Utilize precision measuring instruments including calipers, gauges, indicators, and other dimensional inspection equipment.
Maintain a strong attention to the smallest detail and measurement variation, recognizing that exact dimensions and tolerances are critical to product quality.
Demonstrate a thorough understanding of and ability to measure using the metric system (millimeters).
Inspect, measure, and evaluate weld beads to ensure compliance with applicable codes, procedures, and quality standards.
Monitor production activities to ensure products meet industry standards, company policies, and regulatory requirements.
Identify defects, nonconformances, and quality concerns and communicate findings promptly to supervisors and production personnel.
Collaborate with manufacturing and engineering teams to support corrective and preventive actions.
Prepare detailed quality reports, inspection records, nonconformance reports, and other quality documentation.
Analyze inspection data and provide recommendations for continuous improvement.
Maintain accurate inspection and measurement records.
Stay informed of applicable quality standards, procedures, and regulations.
Maintain a safe and healthy work environment by following company policies, procedures, and all applicable safety regulations.

Required Qualifications

High School Diploma or equivalent education.
Minimum 2-3 years of experience measuring components using high-accuracy measuring devices.
Minimum 2-3 years of experience reading and interpreting mechanical drawings and blueprints.
Minimum 2-3 years of experience preparing technical and quality reports.
Proven experience as a Quality Control Inspector, Quality Technician, or similar role in manufacturing or industrial environment.

Excellent knowledge and experience using:

Analog micrometers
Digital micrometers
ID & OD micrometer
Calipers
Gauges
Precision measuring instruments

Ability to perform precise measurements in both standard and metric units, with strong familiarity measuring in millimeters.
Excellent understanding of geometric dimensions, tolerances, and inspection methods.
Strong mechanical aptitude and knowledge of manufacturing processes.
Basic mathematical and arithmetic skills.
Ability to work independently with minimal supervision.

Preferred Qualifications

Technical Degree, Associate Degree, or certification in Mechanical Technology, Manufacturing Technology, Quality Assurance, Industrial Technology, or a related field.
- Technical knowledge of:
  - Wind energy systems
  - Wind farms and wind turbines
  - Gearboxes
  - Main shafts
  - Rotating mechanical equipment
Experience in heavy industrial, renewable energy, machining, fabrication, gearbox repair, or similar environments.

Technical and Administrative Competencies

Proficient with precision measuring tools, including analog and digital micrometers, calipers, and gauges.
Ability to read and interpret mechanical drawings, blueprints, specifications, and tolerances.
Strong mechanical aptitude and experience with quality inspections, reporting, and documentation.
Exceptional attention to detail and commitment to accuracy, quality, and safety.
Strong communication, organizational, and problem-solving skills.
Ability to work independently, collaborate with teams, and train others when needed.

Physical Requirements

Ability to stand, walk, bend, kneel, and perform inspections throughout the workday.
Ability to lift up to 50 pounds.
Ability to work in a manufacturing, shop, warehouse, or industrial environment.
Ability to wear required Personal Protective Equipment (PPE).
Ability to safely inspect large mechanical components and assemblies.

]]> Mon, 24 Aug 2026 00:00:00 CDT 0 <![CDATA[HR / Office Manager]]> Now Hiring: HR / Office Manager

Location: Big Springs, Texas

Position Summary

The HR / Office Manager is responsible for overseeing the daily Human Resources, office administration, facility operations, procurement, workplace safety, and administrative accounting functions of the organization.

This position serves as the primary point of contact for employee administration, onboarding, training coordination, facility management, vendor relationships, and office operations while providing administrative and financial support to the Finance department.

The HR / Office Manager plays a critical role in fostering a positive workplace culture, ensuring operational efficiency, maintaining compliance with company policies, and supporting employees throughout their employment lifecycle.

This position serves as an ambassador for safety, professionalism, and accountability while ensuring the office and facility operate efficiently and safely.

Essential Duties & Responsibilities

Human Resources Administration

Serve as the primary HR contact and support employee relations.
Coordinate onboarding, offboarding, recruiting, and new hire orientation.
Maintain employee records, training documentation, and compliance requirements.
Support HR communications, policies, and employee development initiatives.
Ensure confidentiality and accuracy of all personnel information.

Office Administration & Operations

Manage daily office operations, records, and reporting.
Coordinate office communications, vendor relationships, and administrative support.
Oversee facility maintenance, repairs, and workplace services.
Monitor workplace conditions and ensure a safe, efficient work environment.
Maintain facility documentation and coordinate service providers as needed.

Procurement & Vendor Management

Order office, maintenance, cleaning, and PPE supplies.
Manage vendor relationships and purchasing activities.
Monitor inventory levels and maintain procurement records.
Obtain quotes and support cost-effective purchasing decisions.

Safety & Compliance Leadership

Promote workplace safety and PPE compliance.
Coordinate safety training and documentation.
Support compliance requirements and safety initiatives.
Encourage safe work practices and accountability.

Financial & Accounting Administration

Support invoicing, accounts receivable, and financial documentation.
Maintain customer and vendor records and assist with payment inquiries.
Prepare reports, expense documentation, and audit support.
Enter and maintain data in ERP systems, including Business Central or SAP.

Required Skills & Competencies

Human Resources

Employee Relations
Onboarding & Offboarding
Recruiting Support
Personnel Records Management
HR Compliance
Training Coordination

Office & Facilities Management

Office Administration
Facility Coordination
Vendor Management
Procurement & Purchasing
Inventory Management
Operational Reporting

Finance & Accounting Support

Accounts Receivable
Invoicing
Expense Reporting
Financial Documentation
Administrative Accounting Support
Financial Reporting Support
Data Entry & Record Maintenance

Software & Systems

Microsoft Office Suite (Excel, Word, Outlook, Teams)
Microsoft Dynamics 365 Business Central preferred
SAP experience preferred
ERP System Experience
Electronic Document Management Systems

Professional Competencies

Strong communication, organization, and attention to detail.
Maintains confidentiality, accountability, and professionalism.
Effectively manages multiple priorities in a fast-paced environment.
Promotes workplace safety, PPE compliance, and safe work practices.
Serves as a Safety Ambassador, fostering a culture of safety and teamwork.

Desired Experience

3+ years of Human Resources, Office Management, or Operations Administration experience.
Experience with employee onboarding, employee records, and recruiting support.
Experience coordinating facilities, vendors, workplace services, and procurement activities.
Working knowledge of Accounts Receivable, invoicing, expense reporting, and financial administration.
Experience working with ERP systems such as Microsoft Dynamics 365 Business Central preferred.
Proficiency with Microsoft Office Suite.
Previous experience in manufacturing, industrial, construction, energy, or service-based organizations preferred.

This role is ideal for a highly organized professional who can successfully balance Human Resources, Office Management, Facilities Administration, Procurement, Safety Leadership, and Financial Support responsibilities while serving as a trusted resource for employees and leadership alike.

]]> Fri, 21 Aug 2026 00:00:00 CDT 0 <![CDATA[Fleet Mechanic]]> Midland Client is seeking

Scope of Work

Diagnoses, repairs and maintains city-wide heavy equipment.

Essential Job Duties

Diagnoses equipment and vehicle malfunctions such as ignition, steering, engine control, electrical, heating, and air conditioning.
Estimates costs and repairs to specifications.
Repair and or replace hydraulic cylinders, hydraulic lines, and pumps on tractors and sanitation equipment.
Performs state safety inspections on all city-wide vehicles
Make ready all new vehicles and equipment. Installs special equipment.
Employee must provide own hand tools with a roll-around toolbox.
City supplies major equipment including power tools, computerized analyzers, and other diagnostic equipment.
Reads electrical diagrams, manuals, and other specifications in order to make repairs to include the usage of several different types of software equipment to perform diagnostic repairs. (Laptops and handheld analyzers)
Performs emergency repairs for various departments during and after regular working hours.
Cleans and maintains shop facilities, equipment, tools, and grounds.
Maintains records of work performed such as work orders, logs, historical information, and special written requests.

Physical and Environmental Conditions

Ability to sit, stand and transport self from building to building and vehicle-to-vehicle.
Able to drive a city vehicle to and from different worksites.
Employee will work in extreme temperatures bending, kneeling, twisting, and climbing in order to make repairs on vehicles or equipment.
Employee can work with mechanical, biological, chemical, and electrical hazards while repairing vehicles and equipment.
Employee is also required to perform heavy lifting of machinery and parts frequently.
Safety glasses, hearing protection, and gloves provided

Required Qualifications

Ability to effectively communicate with employees, management, and vendors in order to diagnose repairs and order materials for repair.
The employee also communicates with other employees in the workgroup and in other departments.
Knowledge of proper tools used in welding and fabricating parts and equipment.
Ability to safely use tools, vehicles, and equipment such as emissions and battery testers, electronic diagnostic equipment like a diesel laptop and brake lathes, bench grinders, lifts, overhead cranes, jacks, air conditioning and recovery systems, trucks, tractors, forklifts, and hand tools, air tools and welding and cutting torches.
Skill in reading and practical application of manuals, blueprints, and other similar specifications used by city departments.
Ability to read, measure, and calculate the types and sizes of materials needed and the ability to determine a reasonable amount of time that will be used in the actual fabrication process.
Strong mechanical knowledge.
High school diploma or GED required and/or a Technical degree in automotive and diesel technology preferred.
Prefer one to three years of training as a mechanic or in a related field.
Valid Texas Class A CDL Driver's License within one year of employment.
Texas Department of Public Safety Inspector Certificate required within one year of employment.

]]> Wed, 19 Aug 2026 00:00:00 CDT 0 <![CDATA[Field Service Tech]]> Essential Job Functions • Investigates and reports meter failures, reports water leaks and the need for new meter boxes. • Operates commercial meter test bench as well as field testing equipment and generates a report. • Maintains, reads, installs, repairs, replaces and connects/disconnects water meters to complete work orders and assignments. • Organizes tools, equipment and supplies necessary to complete assignments. • Inspects, cleans, and maintains equipment and tools in safe operating order. • Performs routine inspections of assigned areas to detect any necessary repairs or hazardous conditions. • Cleans work sites and replaces landscaping. • Paints, repairs, and maintains equipment, furniture, and facilities. • Provides backup assistance, on-call coverage and support to other City departments as assigned • May occasionally be required to work on-call, evenings, or weekends. • Travels to attend meetings and training. • Performs other related duties as assigned. • Regular and consistent attendance for the assigned work hours is essential. • Must have a current a valid Texas Driverâs License]]> Tue, 18 Aug 2026 00:00:00 CDT 0 <![CDATA[Tubing Line Technician]]> Well established Client in Odessa, Tx is seeking a :

Tubing Line Tech

Replaces the tubing line on rigs and occasionally change out blocks. Requires a good driving record as they will be driving a company truck pulling a 5th wheel trailer to and from jobs usually within 150-mile radius. Must be available early mornings and late evenings. Requires being ion call on a rotation basis. Must be able to use overhead hoist, forklift, stand for long periods, climb, bend, kneel, push, pull, lift 50-70 lbs., tolerate all kinds of weather, have good eyesight and a good attitude.

]]> Thu, 13 Aug 2026 00:00:00 CDT 0 <![CDATA[Sandline Technician]]> Well established client in Odessa is seeking a :

Tubing Line Tech

Replaces the sand line on rigs and installations. Requires a good driving record as they will be driving a company truck pulling a 5th wheel trailer to and from jobs usually within 150-mile radius. Must be available early mornings and late evenings. Requires being ion call on a rotation basis. Must be able to use overhead hoist, forklift, stand for long periods, climb, bend, kneel, push, pull, lift 50-70 lbs., tolerate all kinds of weather, have good eyesight and a good attitude.

]]> Thu, 13 Aug 2026 00:00:00 CDT 0 <![CDATA[Shop Hand]]> Well established Client in Odessa is seeking a:
Shop Hand

Assembly of wire rope slings
Installing winch lines on trucks
Keeping work area clean

]]> Thu, 13 Aug 2026 00:00:00 CDT 0 <![CDATA[Regional Sales Manager Direct Hire]]> About the job:

Sales and Distribution of Downhole Casing accessories: Centralizers, Stop Collars, Floating Equipment, Cementing Plugs.

Summary:
We are seeking a Regional Sales Manager (RSM) for managing and generating New Sales and Driving Business Development across the Permian Basin of Texas and rest of Texas including New Client Acquisition, Customers Relationship Management and Partnerships with Distributors to successfully generate business and regional sales within the Permian Basin and Texas.

The Sales Manager (SM) will be responsible for developing the business and increase distribution of THE COMPANYâs products within the United States.

The Sales Manager maintains an overview of the market and works with the Customers & Distributors to identify opportunities and grow profitable revenue. This position will be responsible for developing and maintaining profitable relationships with potential customers. The Sales Manager typically interface with mid-level managers up to executive-level managers in the corporate company as well as have do liaising with Owners / President of Distributors company for sustained business growth in the region.

Key Responsibilities Area:

The Regional Sales manager role is to bring extensive customer interaction and a strong focus on business development and tailored casing accessories solutions.
Drive new business development within target customers and distributors to achieve defined growth.
To work closely with clients and their procurement /decision making teams to identify needs, shape value-driven offerings, and support long-term commercial growth.
Develop strategies and tactics, for acquiring new customer and market intelligence, either directly or via distributor network.
Identifying new business opportunities and driving early-phase discussions.
Presenting customized solutions to customers and developing / maintaining close customer relationships.
Creating and executing sales strategies for New as well as Existing Key accounts.
Create and implement a strategic sales plan to grow the customer base within existing and new market segments and expand beyond.
Develop quotes and proposals for clients.
Develop goals for business growth and ensure they are met.
Optimizing pricing models and commercial terms to improve competitiveness and profitability.
Responsible for the development and implementation of sustainable key client strategies.
Communicate new opportunities, special developments, information, product requests and feedback gathered through related activities to the senior management team.
Act as an ambassador of the Company at all levels both internally and externally
Responsibilities include overseeing the overall administrative functions of the sales department, including managing the sales, optimizing Tender & Sales Order processes, and ensuring accuracy in sales data, order processing, and customer contracts.
To ensure cost estimates for new and proposed products are accurate and competitive, coordinating with internal departments to meet submission deadlines.
Coordinate with senior management team and operations to develop, maintain and continually improve sales materials.
Organize and maintain customer databases, and prepare reports and correspondence as required.
Collaborate with internal department head to support business operations and ensure clear communication across teams.
Provide regular Product training & Support training of distribution partners on product functionality and growth strategy.
Monitor competitive dynamics, pricing trends, and market shifts.
Represent THE COMPANY at industry events and trade associations globally.
Maintain and cultivate inâdepth customer contacts to ensure maximum sales penetration within customersâ organization.
Strategic thinker with the ability to deliver results through tactical management
Strong business and financial acumen, ability to understand budgets and link sales performance to P&L impact
Strategic pricing acumen with proactive approach to maximizing market value.
Demonstrated ownership and accountability for the territoryâs success. Ability to work well independently and as part of a group.
Fiscal responsibility around travel and business expenses.
Ability to present ideas effectively to drive decisions across the organization.
Develop account plans for top customers outlining growth strategy, risks, and opportunities.
Regular & Daily Travel required in territory to meet business objectives.
Thrives in fast-paced, results-driven environment and works with a sense of urgency.

Qualifications/Requirements:

The requirements listed in the section that follow are representative of the knowledge, skills and abilities required to perform the duties of this job.

7â10 years of oilfield equipment sales, preferably casing accessories. Proven success in regional market development for casing accessories and comparable experience of managing sales to large size operators and drillers in the Permian Region & Rest of Texas.

Bachelorâs degree in business administration or in mechanical engineering â desirable.

Location: Remote Texas-USA; Preferred Candidate will be in based out in the Midland / Odessa.

In-line reporting to the Country Manager â USA & Canada on the status of the business development into the areas and dotted lines to reporting to Top Management.

Regular travel required within sales region and nationally.

Work extended hours as when necessary to meet customer expectations and business objectives.

]]> Thu, 30 Jul 2026 00:00:00 CDT 0 <![CDATA[Maintenance Technician]]> Strong Midland client is looking for a dependable, hands‑on Maintenance Technician who takes pride in keeping equipment running safely, smoothly, and efficiently. If you enjoy solving problems, working with your hands, and being part of a team that values skill and initiative, this role is a great fit.

Job Description

Keep equipment running strong â Inspect, troubleshoot, and repair mechanical systems to support safe, productive operations.
Work with a variety of industrial machinery â Pumps, motors, conveyors, elevators, palletizing equipment, compressors, grinders, and more.
Support hydraulic, pneumatic, and electrical systems â Including electrical work up to 480V AC.
Solve problems on the spot â Use sound judgment to identify issues and make corrections quickly.
Contribute to a strong team culture â Work independently while supporting a collaborative, safety‑focused environment.

Requirements:

Self‑motivated learners who take ownership of their work and continuously build their skills
Flexible, reliable technicians who can handle multiple tasks and adapt to changing conditions
Physically capable individuals able to lift 100 lbs and work in extreme temperatures
People who value safety and make smart decisions in potentially hazardous situations

]]> Tue, 21 Jul 2026 00:00:00 CDT 0 <![CDATA[Class A CDL]]> Class A CDL Delivery Driver Job Description

Job is temp to permanent.
Hours: Monday thru Friday. Actual starting and ending times will vary depending on the day and route. On rare occasions, may need to work on a Saturday.
Applicant will be delivering product to our restaurants with the help of a swamper using a dolly/hand truck.
- Will need to be able to be able to lift up to 60lbs safely.
- Will need to be able to climb in and out of the trucks and trailers safely. Good physical health and ability is a plus.
- Must have 2 years of driving tractor/trailers for 2 years and a clean driving record.
- Will be home nightly, may be asked to work our overnight Dallas/Ft Worth routes if we are short a driver for that route. (Rare)
- Will be delivering product to Fast Food Chains.

]]> Tue, 21 Jul 2026 00:00:00 CDT 0 <![CDATA[Inside Sales]]> Client in Odessa, Tx is pursuing a:

Inside Sales Representative

Responsibilities Include:

Maintains Good Customer relationships while ensuring high levels of customer satisfaction through excellent sales service
Assessing customersâ needs and providing assistance and information on products.
Remain knowledgeable on products offered and discuss available options.
Team up with Outside Sales Representatives via email, phone and in person to submit customersâ quotes and orders
Team up with co-workers to ensure proper customer service
Process points of sale purchases.
Handle returns of merchandise.
Maintains a database of clients and orders.
Establish new client relationships when possible.
Follow up on orders by contacting clients to obtain missing information, answer inquiries, ensure timely deliveries.
Attend meetings, sales events and training to keep informed on new technology, products and features.
Coordinate shipping, receiving and delivery of products and materials.
Provide proper certificates and tags for products by using Proof Test equipment.
Loading customers' orders.
Comply with inventory control procedures including ordering products.
Participating in "On Call" working rotation.
Provide feedback to management on client concerns
Take up other job duties as assigned.

Qualifications:

Experience in a customer service environment.
Basic understanding of sales principles and customer service practices.
Proficiency in English
Basic Math skills
Ability to work well in a fast-paced, team environment.
Ability to multi-task, prioritize, and manage time effectively.
Strong communication, negotiation and interpersonal skills.
Strong listening skills.
Ability to perform under pressure and address complaints in a timely manner.
Knowledge of applicable computer operating systems and software.
Working knowledge of products and their usage.
Self-motivated and driven.
Ability to work flexible hours.
Ability to sit for long periods of time.
Ability to work in hot or cold conditions
Ability to climb, bend, squat, and kneel at various times.
Ability to lift to 50 pounds.

]]> Thu, 16 Jul 2026 00:00:00 CDT 0 <![CDATA[Heavy Equipment Mechanic]]> Tue, 05 May 2026 00:00:00 CDT 0 <![CDATA[Kennel Attendant]]> Tue, 21 Apr 2026 00:00:00 CDT 0 <![CDATA[Engine Mechanic]]> Join A Strong Established Company in Odessa, TX Today

Engine Mechanic:

Job description:

Candidate Requirements

Good mechanical aptitude
Clean Driving Record
Must Have Experience In CAT Engines & CAT ET Training
Experience in troubleshooting and repair of various drilling equipment components
Rig experience beneficial
Shop and Field overhaul experience
Self-motivated
Willingness to work with others to complete jobs (Team Player)

Successful candidates will be required to carry out field service and repair work at various rig locations. In addition to field service, mechanics will be working in our manufacturing and repair shop. Training will be given, but candidates should have experience in rig equipment.

]]> Mon, 20 Apr 2026 00:00:00 CDT 0 <![CDATA[Manual Machinist]]> Odessa Company Seeking Manual Machinist to join their team.

Successful candidates will be required to machine components for equipment used in the Oil & Gas Drilling Industry.

Candidate Requirements

2-5 years of Manual Machinist experience preferred
Must own tools

]]> Mon, 20 Apr 2026 00:00:00 CDT 0 <![CDATA[Engine Shop Foreman]]> Excellent client in Odessa, Tx is seeking

Engine Shop Foreman

1. Oversee Engine Shop Operations:

a. Review all current job information on an ongoing basis including employee hours, purchased product, and billing

b. Accountable for the overall direction and decision making of the Engine shop.

c. Promotes fairness and equal opportunity for growth within the Engine shop.

d. Plans and manages the job distribution for Engine shop.

e. Approves all purchases required for job completion.

2. Projections/Forecasting:

a. Responsible for projecting the inventory levels required to meet customer requirements

3. Overseeing ISO 9001:

a. Communicating with the departments under their control the commitment to quality and overall continuous improvement

b. Promotes and supports the company quality policy

c. Establish quality objectives that conform to the direction of Top Management

d. Review quality manual and quality procedures as needed

4. Miscellaneous:

a. Attend sales and vendor meetings as required to promote and strengthen relationships.

b. Conduct continuous customer satisfaction surveys

5.Requirements:

-High School Diploma or equivalent.

-Must be Computer literate and have basic leadership skills including excellent written and verbal communication skills

-Must be able to pass an annual in-house vision exam.

]]> Mon, 20 Apr 2026 00:00:00 CDT 0 <![CDATA[Manuel Machinist]]> Excellent Client

In Odessa, Texas

Is Seeking a

Manuel Machinist

Job Duties but not limited to:

Operate manual machines, including VTL (Vertical Turning Lathe)
Read and interpret blueprints and work instructions
Measure and inspect parts to ensure accuracy
Maintain machines and tools in good working condition
Follow safety and quality standards

Requirements:

Minimum of 2 yrs manual machining experience
Experience operating VTL machines
Strong blueprint reading skills
Familiarity with measuring tools and machining practices
Reliable, detail-oriented, and safety focused

]]> Tue, 10 Feb 2026 00:00:00 CST 0 <![CDATA[Public Health Nurse]]> Client in Midland, Tx is seeking a:

Nurse

SCOPE OF WORK:

Administers quality health care to the community focused on promoting optimum wellness and disease prevention.

ESSENTIAL JOB DUTIES:

Provides individualized care according to policies, procedures, program standards, physician orders, and standing delegation orders.
Performs disease intervention, surveillance, and prevention functions including Tuberculosis Elimination and Control, HIV/STD, Perinatal Hepatitis B, Immunizations, and other Communicable and/or Notifiable Conditions.
Applies epidemiological principles and methods to assess, prevent, and control disease and promote health.
Immunizes citizens against diseases and provides counseling regarding the vaccines and their side effects.
Performs activities and completes documentation associated with various grant deliverables.
Involved in community outreach and assist with community health education programs and presentations.
Establishes and maintains communication and partnerships with stakeholders including community leaders, other agencies, groups, healthcare providers, schools, and the public.
Correspondence with stakeholders via telephone, email and in person.
Provides consultation, training, and technical assistance to healthcare providers, academia, and the community.
Maintains accurate records of work performed.
Performs other related duties as assigned.

PHYSICAL AND ENVIRONMENTAL CONDITIONS:

Ability to transport self from building to building and to attend various functions and meetings at other sites either within or outside of the city.
Employees will be exposed to potentially hazardous chemicals and body fluids when giving immunizations or obtaining/handling laboratory samples.
Ability to bend, twist and lift babies and children regularly.
Fine dexterity when preparing and administering medications and immunizations.
Fine dexterity when using computer keyboard, telephone keypad, and calculator.

REQUIRED QUALIFICATIONS:

Knowledge, Abilities and Skills

Knowledge of current health care and wellness techniques. Ability to read and understand technical materials, reports and journals relating to community health.

Ability to measure and dispense medications by weight of patient Skill to effectively communicate, orally, written, and via a computer, to patients, community groups and employees. Advanced computer skills required. Experience with spreadsheets required. Good organizational skills are a must. Experience with electronic medical records is preferred. Ability to function as a team member. Ability to maintain confidentiality and comply with HIPAA requirements.

Minimum Education, Experience and Certification

Associate degree in Nursing and six months to one year of experience in a nursing position required. License as a Registered Nurse (RN) and a valid Texas driver's license required. CPR certification.

]]> Mon, 03 Nov 2025 00:00:00 CST 0